Product ID:EXTERIOR W M WHITE, FAM800
MSDS Date:05/22/1989
FSC:8010
NIIN:00N015154
MSDS Number: BKPWY

ATHEY PAINT COMPANY

1809 BAYARD ST
BALTIMORE, MD 21230
US

Emergency Phone: 301-727-3823

Info Phone: 301-727-3822

Cage: HO817

C M ATHEY PAINT CO

BALTIMORE, MD 21230 US

Telephone: 301-727-3822

Cage: 84205

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 3.41%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 19.37%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 11.71%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE EFFECTS OF OVEREXPOSURE.
Explanation of Carcinogenicity:NONE.
Effects of Overexposure:INHAL:MAY CAUSE HEADACHE AND NAUSEA.
SKIN:POSSIBLE PRIMARY IRRITATION (MATERIAL IS SLIGHTLY ALKALINE).
EYE:PRIMARY IRRITATION.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INHAL:REMOVE TO FRESH AIR. SKIN:REMOVE W/SOAP & WATER. REMOVE
CONTAMD CLTHG. EYES:FLUSH IMMED W/LG AMTS OF WATER FOR AT LEAST 15
MIN. CALL MD. INGEST:DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DO
NOT IN DUCE VOMITING. CALL MD OR POISON CONTROL CENTER IMMED. TREAT
SYMPTOMATICALLY.

Extinguishing Media:COMBUSTIBLE LIQUID - CLASS IIIB. USE EXTINGUISHING
MEDIA SUITABLE TO SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MAY SPATTER IF HEATED ABOVE 212F. CLOSED
CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:SCOOP OR MOP UP SPILLS. ABSORB W/SAND,
VERMICULITE, ETC. TRANSFER TO CONTAINERS FOR DISCARDING. WEAR
PROPER NIOSH/MSHA APPROVED PROTECTIVE GEAR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP MATERIAL FROM FREEZING. KEEP
CLOSURE TIGHT & CONTAINER UPRIGHT TO PREVENT LEAKAGE. DO NOT STORE
WHERE TEMPERATURE MAY EXCEED 125F.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
CONTACT W/SKIN. DO NOT GET INTO EYES. USE ADEQUATE VENTILATION.

Respiratory Protection:USE NIOSH/MSHA APPROVED MECHANICAL FILTER
RESPIRATOR TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING
SPRAY APPLICATION.
Ventilation:USE WITH ADEQUATE VENTILATION. PROVIDE EXHAUST SYSTEM WHEN
USED IN ENCLOSED AREAS.
Protective Gloves:RUBBER TYPE SUGGESTED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING, OR USING
WASH ROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:B3
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER.
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:59.78

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:BURNING OF DRIED COATING CAN PRODUCE
CO*2 AND CO.

Waste Disposal Methods:DISPOSE OF IN CLOSED CONTAINERS. DO NOT
INCINERATE. BURY IN LANDFILL WHERE PERMITTED. DISPOSAL SHOULD BE
DONE I/A/W FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.